Products tagged with 'forklift'

Heavy Duty Forklift Broom for sale 1200mm to sweep, push or move grain,rubbish,sand,gravel,rocks and many other materials in your warehouse, landscaping yard or car park.

Heavy Duty Forklift Broom 1500mm to sweep, push or move grain,rubbish,sand,gravel,rocks and many other materials in your warehouse, landscaping yard or car park.

Heavy Duty Forklift Broom 1800mm to sweep, push or move grain,rubbish,sand,gravel,rocks and many other materials in your warehouse, landscaping yard or car park.

Heavy Duty Forklift Broom 2400mm to sweep, push or move grain,rubbish,sand,gravel,rocks and many other materials in your warehouse, landscaping yard or car park.

The 8000 Kg container ramp design is primarily used for bridging a forklift from standard ground level into a standard shipping container. Container ramps are designed specifically to match the height of a container and allow entry and exit of forklifts carrying heavy loads. They prevent damage to your forklift and the ground by attempting to bounce your forklift up the container lip. They are also useful where products on wheels need to be moved in and out and can be located at any door opening.

EW-FR8-REEF is designed specifically for loading and unloading reefer refrigerated shipping containers. These container ramps bridge into refrigeration (reefer) containers from ground-level. The floors of Reefer containers are higher than those of a standard container, needing a taller ramp. The flaps of these ramps allow the ramp and container to align on slightly uneven ground.

Forklift container ramp (Fixed) made super tough to safety standards. Fixed forklift container ramps designed to access shipping containers to your requirements. 160cm x 200cm x 17cm, Treadplate Deck, Safety chains included, Compliance Plate, 12 Month Warranty. Stock Sydney, Melbourne, Brisbane, Adelaide and Perth

EW-CR7 forklift container ramp is our ramp for people on a budget - our no frills ramp! 7000kg capacity with Stock in Sydney, Brisbane, Perth and Melbourne

Designed for standard 2 x 205 Litres steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the Drivers seat.

Designed for standard 205 litre steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the Drivers seat.

The EW-DL1000 Drum Lifter can be coupled with the PBO Plastic Barrel Option for use with plastic drums.

The EW-FDD50 Drum Dumper provides a fast and efficient solution to emptying 205 litre steel drums, ideally suited to waste and scrap products. The drum is secured with the sturdy belly strap and locked in place with the over-centre catch and locking pin.

Designed for standard 205 Litres steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the Drivers seat.

EW-DL20 Designed for standard 205 litre steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the Drivers seat.

Converts your forklift in to a drum positioner.

This Industrial positioner is designed to handle 210L steel or L & XL ring drums. Ideal for loading/unloading drums stored horizontally on drum racking, stands & vehicles.

Safely pick up extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber, plaster tubing etc.

Forklift Spreader Bar is perfect for safely picking up long products such as plasterboard, roof sheeting, timber, plaster tubing etc.

Safely pick up extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber, plaster tubing etc.

Forklift Spreader Bar is perfect for safely picking up long products such as plasterboard, roof sheeting, timber, plaster tubing etc.

Wide Fork spreader allows the lift truck operator to efficiently carry wide loads with a high level of stability. Lengths of pipe, flexible board, and metal extrusion can all be moved without excessive flexing. Quickly and efficiently increase the usable fork spread and number of forks being used. Available with or without load backrest. In Stock Brisbane

The EW-FJ-TOWS Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation.

2 x lifting positions, Slim line - allows for best possible visibility, Lifting hook included, Painted finish is standard but may be supplied in Zinc, Secured to the forklift by two locking pins

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Sydney, Brisbane, Melbourne and Perth

Container unloader low profile Forklift Jib EW-FJ-5420 low profile design specifically designed for the unloading of goods from shipping containers, especially where height is a critical factor. The EW-FJ-5420 is a telescoping two section rectangular tube steel jib built to comply with current safety guidelines and manufactured from heavy gauge Australian rectangular tube steel, AS1163-450 LO, which ensures strength, reliability and safety.

The type EW-FJCL45 Fixed Jib (Long) is designed as an affordable general purpose Jib with a 3.465m reach when fully extended.

A simple slip-on Jib with 2 hook positions.

The EW-SFJL2.5 Fixed Jib (Long) is designed as an affordable general purpose forklift jib with a 3.5 metre reach when fully extended allowing for long reach lifts.

The EW-FSB200 Fork Truck Battery Jib is designed for the quick, safe removal and replacement of battery packs in electrically operated forklifts. The unit is equipped with multiple lifting points to suit either 2 or 4 lift point batteries with outer hook points at 500 x 900mm centres and is suitable for use with either forklift or crane.

Need both options of using a standard forklift and also 360 degree rotation then look at this forklift rotator.

1070mm (Class II), Overall Width: 1115mm, Speed: 5.1 RPM @ 56 L/min, Torque: 9705 Nm @ 159 Bar, Capacity: 2500kg @ 600mm

1070mm (Class II), Overall Width: 1115mm, Speed: 5.1 RPM @ 56 L/min, Torque: 9705 Nm @ 159 Bar, Capacity: 2500kg @ 600mm

Capacity on load centre Q1 (kg): 2045, Load centre LC (mm): 500, Maximal fixed frame width B (mm): 1040, Minimum opening range over the forks W8 (mm): 210, Maximum opening range over the forks W9 (mm): 895

Heavy duty forklift rotator with 6000kg capacity to suit Class forklift carriage

Need both options of using a standard forklift and also 360 degree rotation then look at this 3000kg forklift rotator

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. Stock Sydney, Brisbane, Melbourne and Perth

The Budget Tilt Jib 4700kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application.

The Budget Tilt Jib 7500kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application.

The type EW-TJCL25 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments.

The type STJL5 Tilt Jib (Long) with 4750kg capacity is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments.

The type EW-TJL5 Tilt Jib (Long) with 4750 maximum capacity is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments.

The EW-SC1 forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. Same day pick up available Brisbane, Sydney, Melbourne, Adelaide and Perth.

The EW-SCF folding safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble with stock Sydney, Brisbane, Melbourne and Perth

The EW-SCZAP zinc forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. In Stock Sydney, Brisbane, Melbourne and Perth

The EW-WP-MSF forklift safety cage has wire mesh sides and is shipped flatpacked so is very cheap to freight and is very easy to assemble.

The EW-WBTB Budget Wheelie Bin Tipper is designed to safely and efficiently lift and tip 240 litre wheelie bins. Fitted with a robust tipping mechanism, the tipping action is carried out by pull cord operation from the forklift drivers seat. Tipping can only be carried out once locking pin is released, preventing accidental tipping.

Suitable for emptying 240 litre plastic wheelie bins. The bin is wheeled into the Tipper and secured with safety chains.

Forklift attachment for lifting both 660 litre and 1100 litre Wheelie Bins. Can be easily operated from forklift driver position

Suitable for emptying 240 litre plastic wheelie bins. The bin is wheeled into the Tipper and secured with safety chains.

This Rotator Wheelie Bin Lifter/Tipper is designed to safely lift one or two standard 240 litre wheelie bins. It allows self-dumping of 240L wheelie bins when using a forklift with rotator attachment.

Type DBHS2 Hydraulic Dirt Bucket is a slip-on attachment allowing quick connection to the Forklift with the use of "Quick Connect" hydraulic couplings.

Forklift Slip-on dirt buckets / forklift scoop bucket type DB-M-G for a cleaner work environment that attaches to most forklift models.

The EW-MSB2 0.22 CU M is a manually operated slip on attachment that connects quickly to the forklift without any hydraulic connection required. Ideal for removing loose material from floor surfaces such as sand, gravel, etc. Dumping of product is via a simple mechanical lever operated from the driver’s seat. Bucket is fitted with a hardened steel wear edge. Galvanized finish. In Stock Melbourne.

National Sales offers a complete range of fork slippers/fork extensions with stock on the ground in all capital cities to suit any forklift

The type EW-FJCS25 Fixed Jib (Short) is designed as an affordable general purpose jib with 2500kg capacity and able to manoeuvre in confined spaces, with a 1.96 metre reach when fully extended.

The Type EW-FBT forklift Forward Bin Tipper is ideal for handling and emptying bins in agricultural and manufacturing industries (Mega bins, Nally Bins, etc).

Bulk Bag Forklift Jib attachment is designed with quick detaching hooks to quickly and efficiently lift and move bulk bags around site by just about any forklift.

The type EW-FJCS25-WA Fixed Jib (Short) is designed as an affordable general purpose jib with 2500kg capacity and able to manoeuvre in confined spaces, with a 1.96 metre reach when fully extended. In Stock Perth

The type EW-TJCL25-WA Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. In Stock Perth

The type EW-TJL5-G-WA Tilt Jib (Long) with 4750 maximum capacity is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. In Stock Perth

The Budget Tilt Jib 3500kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application. In Stock Perth

The Budget Tilt Jib 4700kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application. In Stock Perth

The Forklift Container Ramp EW-CR8000-WA is fitted with a handy flip-up fork pockets for easy and safe transportation around a facility. These handles fold up and enable handling. The unit is further supplied with safety chains on either side of the device to ensure the ramp is securely connected to the container, when the ramp is in use. This ramp is ideal for most general applications, as it strong enough to support machinery like forklifts. EW-CR8000 is the new model forklift container ramp with 8000kg SWL and folding design for easy storage. Full compliance for Workcover and includes full documentation including safe use manual and workplace risk assessment. In Stock Perth

The EW-WBTB-WA Budget Wheelie Bin Tipper is designed to safely and efficiently lift and tip 240 litre wheelie bins. Fitted with a robust tipping mechanism, the tipping action is carried out by pull cord operation from the forklift drivers seat. Tipping can only be carried out once locking pin is released, preventing accidental tipping.

Suitable for emptying 240 litre plastic wheelie bins. The bin is wheeled into the Tipper and secured with safety chains. In Stock Perth

EW-DL20-WA Designed for standard 205 litre steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the Drivers seat. In Stock Perth

The EW-FDD50-WA Drum Dumper provides a fast and efficient solution to emptying 205 litre steel drums, ideally suited to waste and scrap products. The drum is secured with the sturdy belly strap and locked in place with the over-centre catch and locking pin. In Stock Perth

Forklift Spreader Bar is perfect for safely picking up long products such as plasterboard, roof sheeting, timber, plaster tubing etc. In Stock Perth

The EW-SC-N-WA Forklift Work Platform has been designed with safety in mind and to carry out those maintenance tasks of short duration and occasional usage where safe working at height is paramount. In Stock Perth

The EW-FS25-M Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting and timber. In Stock Melbourne.

The EW-WBT-1M Bin Lift Tipper Single is suitable for emptying a standard 240 litre plastic wheelie bin. Featuring a simple and safe tipping operation, the bin is wheeled into the tipper and secured with safety chains. The 180 degree tipping operation is simple, safe and the operator doesn’t need to leave the seat during the tipping cycle. In Stock Melbourne.

The EW-WBT-2M Bin Lift Tipper Double is suitable for emptying two standard 240 litre plastic wheelie bins. Featuring a simple and safe tipping operation, the bin is wheeled into the tipper and secured with safety chains. The 180 degree tipping operation is simple, safe and the operator doesn’t need to leave the seat during the tipping cycle. In Stock Melbourne.

The type EW-SFJCS100-M Fixed Jib (Short) is designed as an affordable general purpose Jib able to move in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been designed with wide pockets suitable for Forklifts with special hydraulic Tine Positioners. This slip-on Forklift attachment is held to the Forklift by a safety chain. The Jibs overall length when closed is 1.39 metres.Supplied with safety swivel Hook and Shackle. In Stock Melbourne.

The Incline Jib 4.75 Ton Short is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.36 metres can be gained while the Jib can be fully extended to 2.0 metres. Zinc plated finish. Comes fitted with safety hook and shackle. In Stock Melbourne.

The EW-FJERJL45 Low Profile Forklift Jib is an affordable general-purpose jib. It has a low profile design, with a 3.4 metre reach when fully extended, allowing for long reach lifts. The jibs overall length when retracted is 2.0 metres. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with safety Hook and Shackle. In Stock Melbourne.

The Rigid Jib 4.75 Ton Long is an affordable general purpose jib. It is maneuverable in confined spaces with the ability to extend out to 3.5 metres when fully extended. Manufactured with a Hot Dip Galvanized Finish, they are supplied with a Safety Swivel Hook and Shackle. In Stock Melbourne.

The EW-RJS475 is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain. The standard finish on this unit is Hot Dip Galvanized Finish. Supplied with Hook and Shackle. In Stock Melbourne.

The EW-WP-N forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble.

The type EW-TJCL50 Tilt Jib (Long) with 4750 maximum capacity is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments.

Need both options of using a standard forklift and also 360 degree rotation then look at this forklift rotator.

Need both options of using a standard forklift and also 360 degree rotation then look at this 3000kg forklift rotator

Our range of forklift Bale Clamps enable forklift operator to clamp unpalletised loads. The Bale Clamp's opening range can be designed to suit multiple load sizes.

Suitable for emptying 240 litre plastic wheelie bins. The bin is wheeled into the Tipper and secured with safety chains.

Forklift attachment for lifting both 660 litre and 1100 litre Wheelie Bins. Can be easily operated from forklift driver position

The Telescopic Extension Jib is a valuable addition to any workshop. Designed to provide optimum safety for the forklift operator and assistants during any 'lift by hook' application.

The EW-FSB200 Fork Truck Battery Jib is designed for the quick, safe removal and replacement of battery packs in electrically operated forklifts. The unit is equipped with multiple lifting points to suit either 2 or 4 lift point batteries with outer hook points at 500 x 900mm centres and is suitable for use with either forklift or crane.

Type DBHS2 Hydraulic Dirt Bucket is a slip-on attachment allowing quick connection to the Forklift with the use of "Quick Connect" hydraulic couplings.

360 Rotators increases forklift functionality by enabling the operator to rotate loads and empty bins, while retaining the ability to handle palletised and conventional loads.

360 Degree Rotators increases forklift functionality by enabling the operator to rotate loads and empty bins, while retaining the ability to handle palletised and conventional loads.

The FWL Carriage Mounted Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber or plastic tubing.

The EW-FSA-336-WA Carriage Mounted Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber or plastic tubing.

Safely pick up extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber, plaster tubing etc.

The EW-SFJCS100-WA Telescopic Jib is an affordable 10 tonne general purpose short reach forklift jib designed to suit most lifting and maintenance requirements of larger forklifts that need to manoeuvre in confined spaces.

The EW-SFJCS100 Telescopic Jib is an affordable 10 tonne general purpose short reach forklift jib designed to suit most lifting and maintenance requirements of larger forklifts that need to manoeuvre in confined spaces.

​The ​Forklift Blade Attachment is designed for the easy removal of loose materials from floors with a forklift.

​The ​Forklift Blade Attachment is designed for the easy removal of loose materials from floors with a forklift.

The EW-WP-G-WA Forklift Work Platform is designed for forklift use to safely carry out tasks of short duration and occasional usage, such as maintenance. This safety cage is suitable for up to two people and is manufactured in accordance with Australian Standard AS 2359.1.

The EW-WP-G Forklift Work Platform is designed for forklift use to safely carry out tasks of short duration and occasional usage, such as maintenance. This safety cage is suitable for up to two people and is manufactured in accordance with Australian Standard AS 2359.1.

360 Degree Rotators increases forklift functionality by enabling the operator to rotate loads and empty bins, while retaining the ability to handle palletised and conventional loads.

360 Degree Rotators increases forklift functionality by enabling the operator to rotate loads and empty bins, while retaining the ability to handle palletised and conventional loads.

EW-CR7 forklift container ramp is our ramp for people on a budget with 7000kg capacity and Stock in Brisbane. Pickup Brisbane Warehouse or delivery available Brisbane metro and across Queensland

EW-CR7 forklift container ramp is our ramp for people on a budget with 7000kg capacity and Stock in Sydney . Pickup Noble Park warehouse or delivery available Melbourne metro and across VIC

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity is designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Brisbane warehouse and QLD regional delivery available

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity is designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Sydney.

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Melbourne Noble Park warehouse and VIC regional delivery available

EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. $85 delivery Adelaide metro. Call for regional SA delivery prices

Width: 100 mm, Length: 1600 mm Fork Extension (Pair) 1600mm to suit max size 100mm x 50mm tyne Zinc

Width: 100 mm, Length: 1780 mm Fork Extension 1780mm to suit max size 100mm x 50mm tyne Zinc

2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Sydney , Brisbane, Melbourne and Perth.

Forklift jib attachment with 2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Sydney.

Forklift jib attachment with 2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Melbourne Noble Park warehouse.

Forklift jib attachment with 2 x lifting positions, Slimline allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Perth Wangara warehouse.

Forklift jib attachment with 2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Brisbane warehouse.

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Sydney

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Brisbane warehouse or QLD delivery available

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Perth warehouse or WA delivery available

The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. In stock Melbourne Noble Park warehouse or VIC delivery available

Forklift Spreader Bar 3000mm with load guard is perfect for safely picking up long products such as plasterboard, roof sheeting, timber, plaster tubing etc with flat rate shiping to Sydney, Brisbane, Melbourne, Adelaide and Perth

The EW-SC-C Collapsible zinc forklift safety cage / folding forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble and can then be packed up again when finished and stored

Ideal for scrap metal swarf collection. Forklift Waste Hopper Bin attachment. Engineer tested and certified. 200kg load limit.

Forklift rotator to suit class 2 forklift carriage with capacity of 2200kg at 500mm load centre to suit class 2 forks

Forklift rotator to suit class 3 forklift carriage with capacity of 3000kg at 500mm load centre to suit class 3 forks

This Forklift Safety Cage (Mesh Sides) has a fully welded construction in accordance with the Australian Standards for Forklifts (AS2359.1 Section 12) and is the perfect solution for tough high-access tasks.

This Forklift Safety Cage with Rail Sides is a cost effective design alternative to our standard Forklift Safety Cage (Mesh Sides). Fully welded in accordance with Australian Standard for Forklifts AS2359.1, this forklift cage has a fully pressed checker plate tub section, supported with a welded base structure to offer a robust design that will handle any task required for height safety. There is also a standard self closing gate and removable head board section with mesh infill panels on the rear of the cage.

This Forklift Safety Cage with Rail Sides is a cost effective design alternative to our standard Forklift Safety Cage (Mesh Sides). Fully welded in accordance with Australian Standard for Forklifts AS2359.1, this forklift cage has a fully pressed checker plate tub section, supported with a welded base structure to offer a robust design that will handle any task required for height safety. There is also a standard self closing gate and removable head board section with mesh infill panels on the rear of the cage.

Forklift Extension Jibs are an economical way to maneuver items in confined spaces using your Fork Truck to reach almost 2.8 metres from the mast. Multi angle positioning allows extra height and load capacity using the 4 stage locating pin. This Extension Jib is a fully certified lifting device and comes standard with a compliance plate attached. Ensure the net lifting capacity remains at 0.8 times your forklift capacity to allow for a swinging load.

This Forklift Fixed Jib allows you to lift and reach with efficiency. Take advantage of the special slip ring, which can be moved along the saw tooth plate to achieve the optimum lifting capacity.

This Forklift Economy Jib is an inexpensive way to convert your standard forklift into a small crane and is a great way to transport heavy, awkward items around your workshop or yard.

This Forklift Economy Jib is an inexpensive way to convert your standard forklift into a small crane and is a great way to transport heavy, awkward items around your workshop or yard.

This forklift container ramp (fixed) has been designed with a fixed frame as an alternative to our bi-fold ramp. The unit is fitted with pockets on each side to allow side shifting to the container door access. It is supplied in a red enamel finish with locking chain and hook to attach to container. 1500 mm fixed container ramp.

This long forklift container ramp (fixed) has been designed with a fixed frame as an alternative to our bi-fold ramp. The unit is fitted with pockets on each side to allow side shifting to the container door access. It is supplied in a red enamel finish with locking chain and hook to attach to container. The 1800mm has been particularly designed to enable pallet trucks access to standard shipping containers.

Forklift Container Ramp (folding) is designed in a unique way to access standard shipping containers using a bi-folding container ramp. It allows the forklift operator to approach the container straight on, with fork pockets under the main body of the ramp. Once in position the small ramp section is folded over to form a full ramp section approx. 2100mm long.

The Type EW-FBT forklift Forward Bin Tipper is ideal for handling and emptying bins in agricultural and manufacturing industries (Mega bins, Nally Bins, etc).

Forklift Sideway Hydraulic Wheelie Bin Tipper with fitted Hydraulic Power Pack is designed to safely lift, transport and empty wheelie bins of most sizes with a forklift.

Shipping container wheels / castors allows you to easily move a shipping container on flat surfaces. Connects directly to the bottom corners of your shipping container. Each has a 2 tonne WLL so giving a combined 8 tonne WLL when using four castors

Shipping container wheels / castors allows you to easily move a shipping container on flat surfaces. Connects directly to the bottom corners of your shipping container. Each has a 2 tonne WLL so giving a combined 8 tonne WLL when using four castors

This Bin Compactors are designed to safely and effortlessly compact bulky waste products such as cardboard and plastic.

This Bin Compactors are designed to safely and effortlessly compact bulky waste products such as cardboard and plastic.

This Extendable Cable Drum Lifter is designed to safely lift and transport cable drums of various sizes by forklift.

This Extendable Cable Drum Lifter is designed to safely lift and transport cable drums of various sizes by forklift.

This Telescopic Jib is an affordable 12 tonne general purpose long reach forklift jib designed to suit most lifting and maintenance requirements of larger forklifts.

This Bulk Bag Lifter is designed for lifting, loading and transporting loaded bulk bags by forklift.

This forklift attachment is a slip on style unit that has two hook locations with 3200Kg load capacity and gives the operator a 569/1174mm load point from the forklift carriage face. The second function of the Forklift Towball Jib allows the towball fitting to assist with the movement of standard hitch trailers with a maximum ball load weight of 10% of the capacity or 300Kgs dead weight at hitch point.

The 500kg electric hydraulic wheelie bin tipper is designed to safely lift and empty 80L, 120L, 140L and 240L wheelie bins into a larger commercial bin. It is perfect for commercial or industrial use where there is high bin volumes.

The 500kg electric hydraulic wheelie bin tipper is designed to safely lift and empty 80L, 120L, 140L and 240L wheelie bins into a larger commercial bin. It is perfect for commercial or industrial use where there is high bin volumes.

These container ramps are designed to provide easy access to shipping containers to facilitate efficient unloading of product. All container ramps / loading ramps have convenient fork pockets to allow easy movement around your site.

These container tow bars are used to tow containers or platforms with ISO corners in and around warehouses, manufacturing facilities and yards with towing vehicles like forklift trucks and tractors. Tow bars are helpful to tow containers or platforms with ISO corners in and around warehouses, manufacturing facilities and yards with towing vehicles.

These 20 ton heavy duty truck ramps are suitable for cement, dump, garbage and most heavy trucks.